I develop wireless temperature sensors for greenhouse. I have a DSO and make my scratch devices. Also am I a simple programmer of VB, C. My Slip21 program for their sensors that works for Windows XP later. enokie.dip.jp now is my site that publicizes field test of wireless sensors at real time.
Wednesday, December 28, 2016
Tuesday, December 27, 2016
Monday, December 26, 2016
Sunday, December 25, 2016
Saturday, December 24, 2016
Friday, December 23, 2016
Thursday, December 22, 2016
Task scheduler continued working for a month
You might upload Meas.txt, when you go out or make a short trip for some days. Task scheduler can fix working time. I have been set 96 for 6800 hours in the property of the task scheduling.
The task scheduler has been working for a month. The size of the Windows Page File stays at 333 MB. With more than 24 hours duration, Task scheduler seems to continue working for a long time.
See Slip21 on-line manual at my site enokie.dip.jp
The task scheduler has been working for a month. The size of the Windows Page File stays at 333 MB. With more than 24 hours duration, Task scheduler seems to continue working for a long time.
See Slip21 on-line manual at my site enokie.dip.jp
Wednesday, December 21, 2016
Tuesday, December 20, 2016
Saturday, December 17, 2016
Friday, December 16, 2016
Thursday, December 15, 2016
Wednesday, December 14, 2016
Monday, December 12, 2016
Sunday, December 11, 2016
Friday, December 9, 2016
Thursday, December 8, 2016
Wednesday, December 7, 2016
Tuesday, December 6, 2016
Monday, December 5, 2016
Sunday, December 4, 2016
Failed piles to arrange the tree
I failed to arrange the tree in my backyard before. I cut an old broom to 3 pieces.
The ground was too soft to support the load of the slanted tree.
The ground was too soft to support the load of the slanted tree.
Saturday, December 3, 2016
Friday, December 2, 2016
Thursday, December 1, 2016
Wednesday, November 30, 2016
Tuesday, November 29, 2016
The sun radiation effects outdoor air temperature
01Ar temperature changed like saw shape in the morning yesterday . My wireless sensors also have photo-cells. The varying temperature was caused by the sun radiation, I show the chart.
Monday, November 28, 2016
Sunday, November 27, 2016
Deteriorated NiCd charging current recovery
I charged deteriorated NiCd batteries dissipated by GE digital camer A1455. 200mA flew in the both batteries.
They were 115 and 60mA each, I charged them on Oct 27 the last time. I found that the charger circuit might not work well then.
The CH2 was normal rectangular shape at 40Hz. The duty of on/off was 15/8.6ms. It lasted 15 minutes.
Good charger can charge even deteriorating batteries, I think. One has to confirm that a charger can charge deteriorating batteries or not. But to confirm it, one has to prepare deteriorated sample at first.
They were 115 and 60mA each, I charged them on Oct 27 the last time. I found that the charger circuit might not work well then.
I show the charging currents this time. The initial currents were alternative.
The CH1 wave form was 0 to 188mA, 188 to 324mA, and 0 to drop. The mean value is 200mA. The frequency was 22Hz. It lasted 10 minutes.
Good charger can charge even deteriorating batteries, I think. One has to confirm that a charger can charge deteriorating batteries or not. But to confirm it, one has to prepare deteriorated sample at first.
Friday, November 25, 2016
GE A1455 camera dissipated NiMH Toshiba 2000mAh. I charged them by my charger. The initial charging current exceeded more than 200mA.
CH2(E4) flew in a rectangular shape at 34Hz. While CH1(E3) flew in strange steps, 0 to 280mA, down 100mA and to 0 at the same frequency 34Hz. I had better improve 2SK1290 gate drive circuit as CH2.
CH2(E4) flew in a rectangular shape at 34Hz. While CH1(E3) flew in strange steps, 0 to 280mA, down 100mA and to 0 at the same frequency 34Hz. I had better improve 2SK1290 gate drive circuit as CH2.
Thursday, November 24, 2016
Deteriorated NiCd battery for wireless XBee power suppy
#03 BAT has also dropped. I measured the individual battery voltage by DMM PC510 at 21:02 Nov 23.
NiCd1: 1.253V
NiCd2: 0.049V
The dropping chart is shown as below.
The both batteries duration term is 16/10/26 16:15 through 16/11/23 21:00. The duration time was 28 days 4 hours 45 minutes. NiCd2 might be deteriorated, but the CH2 circuit of my charger was not improved then.
I tried charging these ones, and show the charging current chart.
The initial charging current of NiCd2 is 50mA only in spite of empty. I set NiCd1 in the CH2 battery holder after 0 am. And the charging current exceeded 70mA at instant, but stopped charging at once.
I will not use NiCd2 for wireless XBee power supply. I also confirmed that the charged pair of NiCd1 and NiCd2 did not start GE digital camera A1455.
NiCd1: 1.253V
NiCd2: 0.049V
The dropping chart is shown as below.
The both batteries duration term is 16/10/26 16:15 through 16/11/23 21:00. The duration time was 28 days 4 hours 45 minutes. NiCd2 might be deteriorated, but the CH2 circuit of my charger was not improved then.
I tried charging these ones, and show the charging current chart.
The initial charging current of NiCd2 is 50mA only in spite of empty. I set NiCd1 in the CH2 battery holder after 0 am. And the charging current exceeded 70mA at instant, but stopped charging at once.
I will not use NiCd2 for wireless XBee power supply. I also confirmed that the charged pair of NiCd1 and NiCd2 did not start GE digital camera A1455.
Wednesday, November 23, 2016
#02 BAT work time and the charging current
As #02 BAT voltage gets down, I measured each voltage by DMM.
E21: 1.011V
E22: 1.039V
They worked #02 17:45 Aug28 through 10:30 Nov22 during 85 days 16 hours 45 minutes.
I am surprised that the charging currents were less 100mA, when I began charging them.
The CH1 charging current hardly flew. I had better improve the CH1 circuit as well as CH2.
I took off E22 from the CH2 BAT holder after the current was less than 50mA. The E21 charging time was one fourth of E22. It seems that this pair of E21 and E22 deteriorates harder than another pair of the same Eneloop E11 and E12.
Daily room and outdoor temperature change Nov22
Now I have changed #02 for #03, #03 is indoor. The sharp drop of 02Lq occurred, when changing the #02 batteries.
Tuesday, November 22, 2016
Monday, November 21, 2016
Sunday, November 20, 2016
Saturday, November 19, 2016
Friday, November 18, 2016
Thursday, November 17, 2016
Wednesday, November 16, 2016
Tuesday, November 15, 2016
Air-cleaner on cabinet circulates low temperature air
Monday, November 14, 2016
-0.65m height room temperature is lower than 7°C standard height
Subscribe to:
Posts (Atom)